hypervolt-car-charger01
  • OZEV ELIGIBLE
  • 3 YEAR WARRANTY
  • APP FOR CONTROL AND MONITORING
  • SMART HOME INTEGRATION
  • ENERGY TARIFF BASED CHARGING
  • MADE IN BRITAIN, LOCAL, EXPERT SUPPORT
  • FREE OVER THE AIR SOFTWARE UPDATES
hypervolt01
  • Wifi And Bluetooth Connectivity.
  • IP54 Install Outside And Inside.
hypervolt02
  • Built In 6mA DC RCD Protection.
  • No Earth-Rod.
  • 5M Tethered Type 1 & 2 (7.5M Opt.)

STATUS LIGHT INDICATORS

indicator-blue

BLUE

STAND-BY

The charger is ready to start a charging session.

indicator-gray

NO LIGHT

DEVICE IS OFF

If there are no lights on, check if power is available at the source.

indicator-green

GREEN

CHARGING

Charging is in progress.

indicator-red

RED, FLASHING

FAULT

There is an issue with the charging session. Check status in the Hypervolt app.

indicator-purple

PURPLE

SCHEDULED CHARGING

Ready to start charging, waiting for a time you have scheduled.

indicator-white

WHITE (RING)

HOTSPOT MODE

No internet - requires configuring a network connection.

Product Information Model Hypervolt Home 2.0
Connection capacity Single Phase, 7kW AC
Charging connector Tethered, IEC 62196/Type 2 OR SAE J1772/Type 1
Tethered cable length 5 Meters
Charging protocol Mode 3 (EN/IEC 61851)
Installation PEN fault protection Built-in open PEN protection (detection + isolation) in compliance with Amendment No 1 of BS 7671:2018”. Hypervolt Home 2.0 can safely be installed without an earth-rod.
RCD protection Integrated 6mA DC RCD. Only type A RCD + 32A MCB or equivalent protection is required at source.
Service fuse protection remote maximum current limiter function is available via dashboard and App
Electrical Properties AC Charging Output 7kW, 32A@230V AC
Charging power may vary based on vehicle make and model as well as electrical installation setup.
Input Voltage 230 ± 10% V AC
Input Frequency 50 Hz
Input Current (max) 32 A
Energy Monitoring Power and energy monitoring as standard, internal MID grade meter
Overcurrent protection Internal overcurrent protection (software) plus MCB protection at source
Physical Properties Dimensions (H x W x D) 328mm x 243mm x 101mm
Mounting type Wall mounted
Colour White/Grey
Shipping weight 5.2 Kg
Unit material ABS composite
Environmental Properties Operating Temperature -20 to 40° C
Operating humidity Up to 95% RH, non-condensing
Environmental Protection IP54
Standards and Compliance EMC compliance EN 61000-6-3:2006, EN 61000-6-2:2019
Safety Compliance Low Voltage Directive (LVD) 2014/35/EU, EN 60950-1:2006 + A11 + A1, EN 60950-22:2006, BS 7671:2018 + A1:2020
EV Charging Compliance EN 61851-1:2019, EN 61851-21:2002, EN 61851-22:2002, IEC 62196-1
Communication Status indication / HMI Multi-colour LED ring and front cover signage
Standard Wi-Fi 802.11b/g/n @2.4 GHz, Bluetooth
Communication protocol OCPP 1.6/2.0
Network Security State-of-the-art Cryptography Engine for fast and secure WLAN Connections with 256-Bit Encryption